Free Download HTC M7 (cdtu) Model Rooted Firmware & TWRP Recovery | In24By7

Free Download HTC M7 (cdtu) Model Rooted Firmware & TWRP Recovery | In24By7

Free Download HTC M7 (cdtu) Model Rooted SuperSU Firmware & TWRP Recovery | In24By7

Model Detail:

M7C_DTU 802t:
MID (modelid): PN0780000
CID (cidnum): HTCCN704


Click Below To Download:
Free Download HTC M7 (cdtu) Model Firmware (Lollipop 5.0.2 / Sense 7.0)

Procedure to Flashing the TWRP Recovery Step by Step:



Step 1: Enable USB Debugging

  1. Different Android versions have different ways. Take Android 5.0 Lollipop as example. Other Android version please refer to How to Enable USB Debugging Mode on Android.
  2. Click Menu button to enter into App drawer.
  3. Go to "Settings".
  4. Scroll down to the bottom and tap "About phone" or "About tablet".
  5. Scroll down to the bottom of the "About phone" and locate the "Build Number" field.
  6. Click Menu button to enter into APP Drawer.
  7. Tap the Build number field seven times to enable Developer Options. Tap a few times and you'll see a countdown that reads "You are now 3 steps away from being a developer."
  8. When you are done, you'll see the message "You are now a developer!".
  9. Tap the Back button and you'll see the Developer options menu under System on your Settings screen.
  10. Go to Settings & Developer Options & USB Debugging. Tap the USB Debugging checkbox.
USB Debugging should only be enabled when you need it. Leaving it enabled all the time is kind of a security risk for that this mode grants you high-level access to your device.

Step 2: Click to Download TWRP for your Android Device (HTC M7)

Step 3: Boot into Android Bootloader

Every phone is a bit different to another when booted into bootloader. But most of modern devices boot into bootloader by turning off the device, then hold the "Power" and "Volume Down" buttons for 10 seconds before releasing. If this method doesn't work well on your device, you had better refer to the Google instructions.


Step 4: Flash TWRP to Your Android Device

  1. Connect your device to the PC with a USB cable once in bootloader mode. The device should indicate that the device is connected.
  2. Open the folder of twrp.img by using the mouse on the PC. "Shift+Right Click" on an empty area and choose "Open a Command Prompt Here".
  3. Run the command: fastboot devices. The command returns a serial number, indicating that it can recognize your device. If it doesn't, check which step you have done with mistakes.
  4. Flash the TWRP once the device is recognized by fastboot. And run the command: fastboot flash recovery twrp.img.
  5. Results of flashing. If all goes well, you will see a success message in Command Prompt window.
Step 5: Boot into TWRP Recovery

  1. Use the volume down button to scroll to the "Recovery" option in your bootloader after unplugging from the PC and select it.
  2. If TWRP requires a password, then enter the password or PIN you use to unlock the bootloader. It also ask if you'd like to use in "Read Only" mode. Read Only mode means it will just stay on your device until you reboot it.
  3. After entering the main screen, you can use it to create "Nandroid" backups, restore previous backups, or flash custom ROMs. Once you have made your first backups, you are free to explore TWRP, flash a new ROM and so on.

Note:If the TWRP ask if you would like to root your device, choose "DO Not Install". It is better to root your device with KingoRoot, the professional one-click root apk for Android device, rather than having TWRP do it for you. Remember, backup before you do anything else in TWRP, lest you mess up your device in the process.


Procedure to Install Firmware/Android Version Step by Step:


Step 1: Download Lollipop File and save into your Phone Storage.

Step 2: Boot into TWRP Recovery.

Step 3: Flash the ROM File.

Post a Comment

0 Comments